Items

1

Gantry

1.1

Integrated Casting Gantry

1.2

High – Precision Bearings

1.3

Mobile Operation Panel

1.4

Thermal Airflow Isolation Design

1.5

Intelligent Temperature Control System

1.6

Double Feedback Motion Control System

1.7

Respiratory Navigation System

1.8

Anti-Collision Safety Protection

2

Tube

• Anode heat storage capacity: 3.5MHU

3

Detector

3.1

High-Precision And High-Strength Design

3.2

Modularized Digital Detector

3.3

Innovative Anti-Scatter Grid (ASG)

3.4

Digital ASIC Chip

4

HV Generator

• Power rating: 32kW

5

Table

• Max weight load：450lb（205kg）

6

Console

• Operation system: Windows 10 in English

• Console memory: 32GB

• Liquid crystal display of high resolution: 24”, 1920 x 1200

7

Scan And Image Reconstruction

8

Built-in PDU

• Power: 50kVA

9

Advanced System Software

9.1

IMA Intelligent MA Modulation

9.2

NDI Iterative Reconstruction

9.3

MAS Metal Artifact Suppression

9.4

Beam Hardening Artifact Correction

9.5

Posterior Cranial Fossa Image Optimization

9.6

Streak Artifact Suppression

9.7

Helix Artifact Correction

9.8

70KV low-dose Scanning

9.9

1024 x 1024 Large Matrix Imaging

9.10

Bolus Automatic Tracking

10

AI Function

10.1

Smart Puncture Positioning

10.2

Smart Chest Reverse Scan

10.3

STM Automatic MPR

11

Clinical Application

11.1

3D Volume Reconstruction VR

11.2

Multi-Plane Reconstruction MPR

11.3

Curved Planar Reformat CPR

11.4

Surface Shaded Display SSD

11.5

Maximum Intensity Projection MIP

11.6

Minimum Intensity Projection MinP

12

Remote Maintenance System

13

UPS

• 3KVA

14

Accessory KIT

• Patient Table Pad

• Knee Pad

• Head Holder

• Head Holder Pad

• Bandage

• Phantom

• Console Desk

• Extended Patient Table

1.3

Mobile Operation Panel

• Independent, removable operation panel, can be placed on the left or right side of gantry.
• Controls the 3D lasers positioning light, and the movement of patient

table including fast and slow speed modes.

1.4

Thermal Airflow Isolation Design

• Effectively isolates the hot air from the outer (including the X-tube and HV generator) and inner detector.
• Ensures the thermal stability of the detector during continuous scanning.
• Greatly extends the service life of the detector and reduces the

degradation of the image quality.

1.5

Intelligent Temperature Control System

• Monitors the gantry temperature in real time

• Quickly adjusts the temperature through the cooling system

• Ensures the system in a stable working state.

1.6

Double Feedback Motion Control System

• High-frequency DC servo motor driving

• Shorter response time and idling time

• Control precisely and movement precisely

• Higher damping function after movement

1,7

Respiratory Navigation System

• Provides 7 languages and supports to user-defined recording.

1.8

Anti-Collision Safety Protection

• The pressure sensors ensure the movement of gantry and bed are within the safe range.
• Emergency stop button to prevent emergency safety incidents.

2

Tube

• Varex

• Anode heat storage capacity: 3.5MHU

• Small focal spot size: 0.7mm×0.8mm

• Large focal spot size: 1.2mm×1.4mm

• Tube current ： 10～300 mA

• Tube voltage : 70kV，80kV，100kV，110kV，120kV，140 kV

3

Detector

• Ultra-high speed heavy rare earth ceramic material

• Number of detector rows: 16

• Number of detectors per row: 704

• Total number of detectors: 11264

• Detector Z-axis Coverage：20mm

• Sampling rate: 5760Views / Rotation

3.1

High-precision And High-Strength Design

• EMC / EMI shielding and Light sealing

• Reduces image noise and artifacts caused by electromagnetic interference and light leakage
• Ensures the mechanical accuracy under high speed rotation

3.2

Modularized Digital Detector

• Anti-scatter grids, scintillator arrays, photodiodes, ceramic substrates, multi-channel connectors, and A / D boards are all integrated into a very small module.
• The integrated design reduces electronic noise and improves image quality, especially for the low-dose scanning due to the fewer

number of X-ray photons.

3.3

Innovative Anti-Scatter Grid (ASG)

• The optimal height of tungsten sheet to meet the requirements of SPR (scatter to primary ratio).
• Each ASG is divided into two discrete grids

• No mutual interference between modules
• The design is helpful to obtain the better images through avoiding artifacts caused by ASG tilt due to temperature drift and improving the SNR.

3.4

Digital ASIC Chip

• Smaller chips

• Higher sampling rate

• Lower electronic noise

• Better low-density detection performance

4

HV Generator

• Spellman

• Power rating: 32kW

• MA range: 10-300mA

·     KV range: 70kV, 80kV, 100kV, 110kV, 120kV, 140kV

5

Table

• Maximum motion range：1600mm

• Max. speed in horizontal direction：150mm/s

• Motion tolerance in horizontal direction：±1mm

• Table elevation range：440mm

• Max weight load：450lb（205kg）

• Mechanical control table horizontal motion

• Manual control table horizontal motion

• Foot pedal control table horizontal motion

6

Console

• Operation system: Windows 10 in English

• Memory：32G

• Hard disk：2 TB

• Raw Data: 1TB

• Frequency：3.6 GHz

• Liquid crystal display of high resolution, displaying matrix (M * M)： 24”，1920×1200
• DICOM 3.0 network interface

• Burn mode：DVD-RW

• DICOM 3.0 print interface

• DICOM 3.0 output and input interface

• Auto-film

• Auto-voice and integrated intercom for communication between operator and patient
• Include DICOM PRINT，DICOM STORE，DIOCM QUERY，DICOM RETRIVE，WORKLIST
• Include HIS, RIS and PACS interface

• Raw data can be reconstructed on the workstation

• Film printing software

• One key turn-on and turn-off

7

Scan And Image Reconstruction

• The fast rotation time: 0.75s/360°

• Longest scanning time：100s

• Longest scanning range：1200mm

• Scout scan direction: anteroposterior, lateral

• Pitch range: 0.25-1.75

• Maximum number of reconstruction slices per rotation：16 slices/ 32 slices*
• Nominal slice thickness: 0.625mm* (reconstruction), 1.25 mm，2.5 mm，3.75 mm，5.0 mm，7.5 mm，10 mm
• Parallel image processing

• Simultaneous Reconstruction: Can reconstruct and reorganize the images simultaneously with a variety of options. Different reconstruction options are available within the scan protocol.
• Scanning FOV： 43cm

• Image reconstruction matrix：512×512，1024×1024

• Image display matrix：512×512，1024×1024

• Children's scanning protocol: According to the different parts of children's scanning, a special scanning method has been developed to avoid sensitive parts as much as possible and reduce radiation damage to children.
• Spatial resolution : 15.62 lp/cm @ MTF =0%

• Contrast resolution : 3mm @ 0.3%，14mGy

• Extended CT Value: -32767 to +32767

8

Built-in PDU

• Input voltage: 3-phase 380V, 50Hz

• Power: 50kVA

9

Advanced System Software

9.1

IMA Intelligent MA Modulation

9.2

NDI Iterative Reconstruction

9.3

MAS Metal Artifact Suppression

9.4

Beam hardening artifact correction software

9.5

Posterior Cranial Fossa Image Optimization

9.6

Streak Artifact Suppression

9.7

Helix Artifact Correction

9.8

70KV low-dose Scanning

9.9

1024 x 1024 Large Matrix Imaging

9.10

Bolus Automatic Tracking

10

AI Function

10.1

Smart Puncture Positioning

10.2

Smart Chest Reverse Scan

10.3

STM Automatic MPR

11

Clinical Application

11.1

3D Volume Reconstruction VR

11.2

Multi-Plane Reconstruction MPR

11.3

Curved Planar Reformat CPR

11.4

Surface Shaded Display , SSD

11.5

Maximum Intensity Projection MIP